Please note that this product is no longer available from HTC

Adhaesium

Please note that this product is no longer available from HTC

1 tin contains 1 strip - 10cms wide x 2 metres long

Price £ 38.00 plus VAT

 

Please note that this product is no longer available from HTC

All prices are plus postage and packing - variable dependent on consignment weight and UK address

 

Next-day delivery to UK Mainland

(subject to couriers terms and conditions)

 

To order by telephone please: Dennis Hanna

0845 678 2971

(United Kingdom)

or buy on line

E mail

Payment by credit card

 

 
All major credit cards accepted

homepage

 

ADHAESIUM® MACHINERY SETTING COMPOUND.

 

v     No bolts

v     No grout

v     No damage to floors

v     No noise

v     No special tools

v     No special labour

v     Less machinery vibration

v     Easily cut to length with a pair of scissors

 

JUST TAKE IT OUT OF THE CAN AND SECURE YOUR MACHINERY

 

Adhaesium® is supplied in a can. It contains a special felt-like strip [2mtr. x 10cm.] coiled and impregnated with a unique resin.

 

 Adhaesium® is a cold setting compound that enables you to fix even heavy machinery swiftly,securely and safely.

 

Some uses for Adhaesium®

 

v     Lathes

v     Floor mounted drill press

v     Wood working machinery

v     Pallet racking

v     Benches / counters

v     Milling cutters

v     Compressors

v     Shaking / vibratory machinery

v     Conveyor systems.

 

 

ADHAESIUM

TECHNICAL DATA SHEET

ADHAESIUM [Standard]
Standard Adhaesium is a cold setting, adhesive impregnated fabric; designed for secure fixing of heavy machines to most types of flooring, without the need for special tools or preparation.

Typical Applications

Lathes
Milling Machines
Drilling Machines
Heavy Pumps
Pumps


ADHAESIUM [light]
Adhaesium light is an alternative concept using a tough fabric and a separate adhesive paste. It attains optimum bond strength quicker than standard Adhaesium and is particularly suitable for fixing lighter machines.

Typical Applications of Adhaesium

Pumps & Compressors
Conveyors
Lightweight Machines
Product benefits

No specialist knowledge or tools necessary
Much reduced installation costs compared with bolting
Positive alignment with minimal effort
Reduction in vibration and noise transmission
No permanent damage to floors
Quick and easy relocation of machines
Physical properties

Descriptionof Adhaesium: A tough non- woven polymer fabric either impregnated with a liquid adhesive or coated with a viscous adhesive paste.
Toxicity: Non toxic and Non hazardous
Flashpoint: >100°c
Shelf life: minimum 12 months

 

 


Cured Properties of Adhaesium

Average Tensile[z- axis] Strength: 0.42 Mpa. [60 psi]
Average Shear bond stregth: 0.87 Mpa. [129 psi]
Temperature range: -180°c to + 1150°c

Packaging of Adhaesium

Standard Adhaesium is sold in plastic pails containing a 2mtr x 10cm length of impregnated fabric.
Adhaesium Light is sold in plastic pails containing 2mtr x 10cm of fabric and 500gm adhesive paste.

Directions for use of Adhaesium

1. Clean floor and base of machine to remove any oil,grease,water or dust.
2. Measure the mounting feet or standing faces of the machine and determine the bonding area of Adhaesium required. Where possible it is recommended that the machine load should be less than 10 psi particularly if any vibration insulation is required.
3. Mark out on the floor the location of the machine and its Adhaesium bonding strips [or pads]. These should be arranged to project about 12mm round the feet or baseplate of the machine.
4. Using standard type; Pull out some of the impregnated strip felt from the centre of the roll of Adhaesium and cut strips to the requirements determined in 3 and place in position on floor.
Using light type ; Cut strips of Adhaesium fabric as above; spread with adhesive paste on one side {using wooden spatula provided} and bond to floor incorrect position. Now apply a layer of adhesive paste to upper side of strip.
5. Lower the machine onto the pre laid strips.{if the machine cannot be 'lowered into position'. then each edge may be levered up in turn and the Adhaesium compound laid underneath it.
6. The Adhaesium will take time to develop its optimum tensile bond, but after 24 hours the lateral stability will be sufficient to allow the machine to be operated without movement.
7. If the conditions in which the machine is to operate are damp or likely to get wet, then the projecting edges of the compound should be covered with a bitumous type sealing compound.
8. To release the mountings [if moving machines];pour boiling water or apply steam to the mountings and leave to soak for 30 mins. Before lifting the machine.If the edges of the pads have been sealed cut off exposed edges before applying water.

Note
The properties of Adhaesium listed in this data sheet are typical and should not be used as a basis for preparing specifications.

No liability is accepted for any injury loss or damage arising directly or indirectly from the use of the company's products or from the use of information given in our publications, which are intended to serve as a guide only. Customers should satisfy themselves by appropriate trials that the products are suitable for their intended use.